Basic Info.
Model NO.
DF-1.25G-8P-1F+1E
Certification
CE, ISO, RoHS, GS
Condition
New
Transmission Rate
10/100/1000m
Max Transmission Distance
250m
Mode
Singlemode, Multimode
Ethernet Port Connector
RJ45
Fiber Wavelength
850nm/1310nm/1490nm/1550nm
Material
Metal
Color
Black,Also Suport Customize
Poe Agreement
IEEE802.3 Af/at Standards
Transport Package
Carton
Specification
188.5mmx102.5mmx28.25mm
Trademark
Default is Neutral, LOGO is also supported
Origin
China
HS Code
8517629900
Production Capacity
50000 PCS/Month
Product Description
10/100/1000M 8 Port POE Switch with 1 Gigabit RJ45 and 1 SFP slot
Brief Introduction
DF-1.25G-8P-2F is a 10-Port Gigabit PoE Switch with 8 PoE Ports, 2 SFP Gigabit Uplink Optical Ports, port 1 to port 8 supports PoE IEEE 802.3at international standard, each port power is 30W. Total power is 120W.
This POE network switch can meet customer's general demands. POE network switch with POE function, designed for high-definition network camera's internet access. It provides 8 1000Mbps PoE Ethernet switches, complies with IEEE802.3af/at standards, and also simplifies wiring, avoids the troublesome of installing power socket for powered devices.
Typical applications please refer to following picture
Features
- 10-Port Gigabit PoE Switch with 8 PoE Ports, 2 SFP Gigabit Uplink Optical PortsSupply power to wireless access points AP and network IP surveillance cameras Port 1 to Port 8 supports IEEE802.3at power (each port maximum power is 30W)8x 10/100/1000 Mbps ports +2x SFP gigabit optical uplink ports Compatible with IEEE 802.3 10i and IEEE 802.3u standardThe packet forwarding speed is 1.488Mbps of one wire-speed portPort features with auto-flip(Auto MDI/MDIX)Network port comes with lighting-proof All ports support wire-speed switching, frame size within the range of 64 to 1536 can achieve wire-speed Automatic adjustment, plug and play, no need software and protocol conversion
Highlights
- No Frame Loss IP Data TransmissionPoE+ Standard 250m in One-key CCTV Mode10 KB Jumbo frames supportFew video time delay4KV Lightning Protection
Technical Specifications
| Item | Description | |
| Model | DF-1.25G-8P-2F | |
| Power Supply | Power Supply Mode | Mains on load |
| Voltage Range | AC 100~240V | |
| Power Consumption | The device <5W, POE power supply <120W | |
| Network Port Parameter | Network Ports | 1~8 Ports: 10/100/1000Mbps Ethernet port, adaptive control Uplink 2 SFP:1000Mbp |
| Transmission Distance | 1~8 Ethernet Port:0~100m Mandatory 10 Mbps reach up to 250m 2 SFP: According to different SFP | |
| Transmission Media | 1~8 Ethernet Port:Cat5e/6 standard UTP cable, 2 SFP: LC interface optical fiber | |
| POE Agreement | IEEE802.3 af/at standards | |
| PoE Power Supply Mode | End-span method | |
| PoE Power Supply Wattage | Each port≤30W,Whole device<120W | |
| Network Switch Specification | Network Standard | IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX, IEEE802.3ab 1000BASE-T |
| Swap Mode | Store-and- forward | |
| Switch Capacity | 20Gbps | |
| MAC Address List | 8K | |
| Status Indicators | Power Indicator Light | One power light (green) |
| Optical Fiber Port Indicator | One fiber link indication light ( green), Green light keeps on when the fiber port is well connected; Blinking when transceiver data | |
| PoE Indicator | 1~8 PoE indicator light(yellow) | |
| PoE Network Port LED | 1~8 port ( green light on RJ45 jack) Keeps on when normally connected, Blinking when transceiver data | |
| Switch | Switch 1(Vlan) | ON: Vlan open, 1 to 8 POE ports only can communicate with uplink port; OFF: Vlan close, normal status |
| Switch 2(CCTV Mode) | ON: Vlan open, 1 to 8 POE ports only can communicate with uplink port, power and data can reach 250 meters; OFF: Vlan close, normal status | |
| Protection Level | Surge Immunity | Level 3, executive standard:IEC61000-4-5 |
| Electrostatic Protection | 1a touch electric discharge: level 3 1a Air discharge: level 3 Executive standard:IEC61000-4-2 | |
| Operating Environment | Working Temperature | -10ºC~55ºC |
| Storage Temperature | -40ºC-85ºC | |
| Humidity(non-congeal) | 0~95% | |
| Mechanical Attributes | Dimensions (L*W*H) | 188.5mmx102.5mmx28.25mm |
| Color | Black | |
| Weight | 1kg | |
| Reliability | Mean time between failures (MTBF) | >50000h |
Note:
If any changes with product specification, forgive without prior notice.
1) As transmission distance has certain relation with the cable, so you are suggested to use standard cat5e/6 cable for longest distance needed.
Certifications
Workshop
Contact